TP-Link Archer T4E AC1200Mbps Dual-Band Wireless WiFi Adapter for PC with Two Antennas, PCIe WiFi Card for Desktop, Low-Profile Bracket Included, Supports Windows 11/10/8.1/8/XP (32/64 bit)

I am very pleased with the performance of this AC1300 (Archer T6E). It thrashed the speed of my previous wifi card.There are two vital points to bear in mind before you start:1. Go to TP-Link’s website and download the appropriate driver file. In my case for W10, the driver file was:Archer T6E_V2_200508_Win10.zip.You will need to download this file on another computer if the current one has no internet access. Then copy this file to a USB drive and copy it to the current computer. I recommend creating a folder called “TPL” on the Desktop and putting the file in there. Then right click on the file and click on “Extract All”.2. The second point to bear in mind is that BOTH your antivirus and firewall must be temporarily disconnected otherwise the driver installation will fail!If you use Kaspersky or similar, you need to disable it first and then go to Windows Defender and also disable that. This is because as soon as you disable Kasperky (or Norton or McAfee etc), Windows Defender will automatically replace the main security system.I recommend searching for “TP-Link How to Manually Install Adapters on Windows 10” and follow the instructions.Also search for “Turn off Defender antivirus protection in Windows Security”.I installed the AC1300 and screwed on the 2 antennae and switched on the PC.As per the above instructions, I browsed to:“Archer T6E(EU)_V1&V2_200508_Win10” and clicked on “Update driver software”.I rebooted the PC and then reactivated Kaspersky’s antivirus and firewall.Finally, I entered the wifi code for my network and my internet was restored.*****You may find that, contrary to the generally accepted wisdom of using the 2.4MHz frequency when you have thick walls and floors, that you actually achieve a higher speed using the 5MHz band.Accepted wisdom:“2.4 GHz networks cover a substantially larger range than 5 GHz wireless networks. 5 GHz networks do not penetrate solid objects such as walls and floors nearly as well as do 2.4 GHz signals”.I switched from 2.4MHz to 5MHz and my second (wifi) PC, which is 2 floors below, went from 11Mbps to 46 Mbps, matching the speed of my first PC which is connected via ethernet cable! It’s worth a try...................................................................................................................................................................................................EDITNo 5GHz signal on Linux? Then change a router setting.I recently bought this dual-channel TP-Link AC1300 Wireless Dual Band PCI Express Wi-Fi Adapter for a desktop PC that sits two floors below my router.The PC was originally using Windows 10 and the 5GHz signal was much stronger then the 2.4MHz one.I then decided to replace W10 with Linux Mint 21.1 MATE. The Broadcom BCM4360 was recognised by Mint and the appropriate driver installed.So far, so good.I then found that only the much weaker 2.4MHz signal was available.I used the excellent Wifi Analyzer (open-source) app on my mobile phone and this registered nothing for the 5GHz band. In contrast the 2.4GHz showed a strong signal.I tried connecting to a “Hidden network” and creating a new network, all to no avail.Finally after much research, I discovered that the Broadcom BCM4360 802.11ac Wireless Network Adapter [14e4:43a0] (rev 03) does not see 5GHz networks with a high channel number.See confirmed bug #1574196 at Launchpad.To rectify this, it is necessary to login to the router and change the channel for the 5GHz to a lower one.In my ASUS router I went to Advanced Settings > Wireless > Wireless General > select 5GHz band.Then clicked on Control Channel and reduced the figure from 140 maximum to say 36.Clicked on Apply and logged out.The Wifi Analyzer immediately picked up a very strong signal from the 5GHz.All is now well using Linux.

The TP-Link 300 Mbps Wireless N PCI Express Adapter (TL-WN881ND) is an excellent upgrade for desktop users seeking reliable wireless connectivity. Installation is straightforward, with the included low-profile bracket accommodating various cases. Performance-wise, it delivers consistent speeds up to 300 Mbps, making it suitable for streaming, gaming, and browsing. Compatibility with multiple Windows versions and Linux ensures versatility for different users. Overall, this adapter is an affordable choice for boosting your network experience, offering stability and ease of use. Highly recommended!

Installation of the card was simple like any other expansion card, my experience is based on Windows 10 so software issues may not be an issue on newer versions.Straight out of the box the card was detected and installed with no issues and I was able to connect to my network, however every 15 minutes or so it would drop the connection and I would need to reboot the computer to get it reconnected.Checking the device manager I see that the driver windows installed was very out of date (2016) so I downloaded the newest software from the TP Links website, installed the updated driver and I have had no issues since.Updating drivers should be done anyway but I know some people sometimes forget so if you have this card and are having connection drop issues, try updating.Other than that the ecard has been fast and reliable.

This TP-Link AX1800 Wi-Fi 6 Dual Antennas High Gain Bluetooth 5.2 PCIe Adapter was easy to install and worked first time using drivers on supplied mini-CD.I'd been successfully using the USB 3 dongle version (Archer T4U) in my 2011 vintage PC, plugged into a USB 2 socket, for over 6 years. However, when I upgraded to full fibre I was losing potential speed using USB 2, so I plugged it into the USB 3 expansion card I had installed. This worked fine and gave the extra speed but with one issue. Every time the computer was woken up, the wifi dropped out for up to 30 seconds. I believe this was due to the USB 3 sockets being on an adapter card and not part of the motherboard provision. Installing this internal wireless card solved the problem - it's active as soon as the computer is woken up and the speed is available too.In addition, this has also added bluetooth to my system. Activating this requires connecting the supplied lead from the card to an internal USB header on the motherboard - which I was surprised to find existed on my PC.Highly recommended.

So I have this card a while and it's been stable and usable, however today I decided to upgrade to fibre Internet with a nice new router provided by my isp.Due to restrictions in other countries this card has its 5ghz channels locked so if you find like me you wifi card is slow as it's not connecting to your 5ghz connection you will have to go into your router settings and dictate that the 5ghz band only uses lower number channels I think under 140 or 130! Other wise the card simply won't see or connect via 5ghz and will fall back to 2.4ghz! I have reached out to tp in regards to this and am awaiting a response. Now on my old router I could simply as mentioned change the channel number, however my new router has been locked down by my isp! This has taken many hours of driver updates and scouring the Internet to no avail!!

Pretty much just a plug and play piece of hardware. I installed in the PC, installed the driver on the accompanying disc and it connected to the wi-fi network straight away. Haven't had any issues iwth it so far.