SidaqiLED 1156 P21W BA15S Turn Signal Light Motorcycle 2" Bullet Style Front Rear LED Turn Signal Bulbs Indicator Tail Lights with Smoke Lens Cover Kit Amber,2 PACK

The lights themselves didn't fit the smoked lens supplied I had to shave them down so they would fit the two lens and when I tried to fit the lens to the Bullet fittings on each of the lens two tabs snapped off they are very brittle and have to be handled with care. Once I had manipulated the lights and heat welded the tabs back on and got them fitted to my satisfaction they had the desired effect nice and bright. For bayonet light fitting fitting into bullet housing and brightness 5 out of 5, the smoked lens and the actual light fitting the lens 0 out of 5.

You will need to file down the outer edge of the LED Bulb part to make the bulb fit flush inside the lense but with a metal file, dremmel or bench grinder it is quite easy to do. They are bright and look fantastic and match the rear light perfectly. The tinted lenses aren’t a brilliant fit and I’m going to order some H-D ones.Difficult level 3/5

First off, the critical info, the led modules installed easy enough though lack little twist grips like I have seen in other brands so you kind of need to use the friction of the tip of your finger to twist the bayonet into the light fitting.The black lenses fitted the rear indicator pods on the bike reasonably well. Took several goes to make them seat but was ok with them eventually. Not as positive fitting as stock but secure.But the lenses didn't really seat fully on the front indicator pods. I think the issue is that 1 of the wee locator tangs has a wee tag end on it and I suspect this prevents the lens seating fully. In my case I had the lenses from another brand handy and they snapped shut perfectly. I would say if you find they dont fit flush be prepared to take a knife to them to remove the wee tangs that are too long.Functionally they work. Initially on my bike (a Lowrider S) they flashed normally but the dash led flashed super fast. However I left the bike standing with the hazards on for about 5 mins and this all self rectified. I understand this is the BCU learning the presence of the LEDs.But I also had an engine management light with a couple of ECU and BCU codes. ( I kind of expected this). Simply drop into diagnostic mode and all the codes are h codes (historic) and cleared ok and stared clear once all settled down. Can't speak for longevity or long term experience yet.

Do not work as described, do not fit well, plastic is brittle and breaks on install!Installation is not as easy as you think as the product is cheap and universalWaste of time and money.

Dont fit as described, basically poorly made. Dont bother.

these leds are dual filament so not going to work on our single bulb fitment 👎🏼

Quality seems good, but it did not fit my 2021 ultra.

Unfortunately despite the checks on Amazon to confirm these will work with your bike, they do not.

Funzionano bene montate da 7 giorni non danno problemi per ora sulla mia Harley

Hallo ich habe die Blinker gekauft... und fand den Preis schon krass aber egal... blinker sind gekommen nicht wildes... Original Birne raus den neuen Blinker rein... sollte einfach sein....Bloß das geht nicht den mann muss die Fassung drehen... bloß geht das nicht... Werder mit Finger noch mir Zange... Mann bekommt die Fassung nicht gedreht... also Dreck in meinen Augen... vielleicht hätte mann einen Steg in die Fassung bauen sollen damit mann es drehen kann...Einfach überteuerten Müll in meinen Augen

produit correspond a ce que je voulais et de tres bonne qualité

Bonjour, je suis très déçu car, contrairement au descriptif, le cercle blanc ne s'éteint pas quand le clignotant orange fonctionne, ce qui rend celui-ci quasiment invisible ; il y a donc tromperie sur le produit car, justement, je l'ai acheté parce qu'il était bien précisé que le blanc s'éteint quand le orange clignote : n'achetez pas !

Die Blinker Steckhülse ist nicht zu gebrauchen, da man sie nicht in die blinkerbuchse eindrehen kann, weil der obere Teil zu labil ist und man nicht richtig anpacken kann. Auch mit einer Zange funktioniert es nicht, da mit beschädigt man die dünne Hülle siehe Foto.