West Systems 610 Resin/Hardener Epoxy Adhesive, 190mL Cartridge, Straw

I have used Six10 over the last 8 years for boat projects. This stuff is fantastic. It has primarily been used as a filler for holes. I've used it to fill gauge holes as well as misc. screw holes when I remove or change something on the boat. It sets up well and sands well with a Dremel. It is extremely strong when hardened. Fill the hole with Six10, sand it down below the gelcoat, the add you gel coat filler, and 'viola', it's like the hole was never there.I also used Six10 when I installed my swim platform. The swim platform had stations that mounted below the waterline. I called West Systems and explained what I wanted to do and they said this was perfect for it. What I did was, drilled larger holes than required for the bolts to mount the stations to the transom below the waterline. Filled the holes with Six10. Let it dry overnight, then drilled the proper sized holes through the Six10 to mount the platform stations. This protects the wood core transom in case you have a sealant leak below the waterline.Great stuff & I highly recommend it for multiple projects.

Used this to fill a few holes in a boat from changing out the outboard and mount. It hardened overnight, did not expand at all and served its purpose. I would order again for any marine application.

Great product - thickened resin and hardener in one tube that get mixed in a disposable mixing nozzle. I always keep one on hand With a little cloth in my boat emergency kit as well as use them for small projects. Convenient, fast, but very expensive for amount of material. If you are careful to not contaminate the resin and hardener sides of the tube , there is a decent chance of getting multiple uses out of one tube. The mixing nozzle is good for one use though, so pick up a couple more. (Ten packs much less expensive than the two packs).

Cures hard and fast and smooth.

this is a great product except for the application to which using a caulk gun makes it hard to get the product out of the tube. got to apply alot of pressure..

A bit expensive but when you don't want the product to slump and you have a lot places where it might be squeezing out and running then this is useful

I've used a lot of the West System products over the last year or 2, and they have all been really great. This product is the exception. I bought 6, realized I was going to need more and bought another 6: 12 x $33 = $396. I might as well have flushed $400 bucks down the toilet.I got half way through the first tube, and it just locked up - no matter how much pressure I put into the caulk gun, nothing came out. OK, bad tube, no worries, try another: locked from the start - didn't get a drop out of it. Same for the next 3 tubes it tried. I tried different caulk guns, in case that was the problem - but no, it's the tubes.Plan B: went back to just using their standard 105 + microfibers and using the usual tools - not optimal as the caulk gun method was what I really needed.I would 100% NOT buy this product again - learn from my mistake...

Worked well