Question 1

Can I use this to light an outdoor gas fire pit? I was hoping to be able to use this instead of lighting a piece of paper.

Accepted Answer

I'd think if you're handy with with things you could do it. I'm pretty sure I could and I don't even know just what you have. You'll have to mount the electrode where the flame originates, and the button somewhere accessible. Keep in mind that the wire is only one meter (~39") long, and you'll want to route it so it's outta the way.

It's less than $10, and a bit of a gamble. Just go for it.

I'm replacing what's on my BBQ. The electrode broke a couple of years ago, so I tapped out a hole for a spark plug, but I gotta turn on the gas for 8 or 10 seconds before sparking it and it goes on with a big hot wooosh - IF it works at all.

Question 2

Diameter of piezo body? Hole size it fits into? This should be in the product information.

Accepted Answer

The opening for that the igniter goes into is larger than the black cylinder but smaller than the black collar. Remember the device is held in place by a large nut secured beneath the sheet metal shelf.

Question 3

is this for a fixed position or can the spark plug slide through the small metal bracket holding it to adjust distance?

Accepted Answer

Complicated question, I’m going to answer it the best way possible. The spark lead at the end of the ceramic igniter is long, bendable, and can be cut shorter. The issue I had is that the Mensi piezo igniters come in two different versions, the model your question is about has a separate ground  wire tab on the ignition module, and the spark module has a separate screw eyelet holding it on the grill. The other version has the ground of the ignition module on the threads of the module connecting it to the metal of the grill where it mounts if it’s metal, and the spark module has threading for a nut to go on the one hole. I had to buy both versions because my older Webber Q300 series grill has a plastic ignition mount hole and I needed a separate ground wire tab to wire to the aluminum grill enclosure, but I needed the spark module with the one hole and the threads on the spark module to mount. I bent and cut the lead of the spark module to the recommended spark gap needed to ignite the grill, and has worked perfectly, and even though I had to buy both kits to make it work, it was still cost much less then the Webber name brand kit, and I have enough spare parts to replace again down the road if needed.

Question 4

Could this be used for a potato cannon?

Accepted Answer

I do not think so because ceramic idolator most likely is not air tight.

Package Dimensions	10.9 x 6.7 x 2.9 cm; 70 g
Part number	43237-2
Material type	Ceramic
Manufacturer	MNS
Manufacturer reference	43237-2
ASIN	B074FPYLQN

MENSI Piezo igniter with Spark Ignition Electrode 200 Degree Resistance Wire 1 Meter Long Set of 2

Description

Specifications

Have a Question? See What Others Asked

Common Questions

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App