USX MOUNTUniversal Speaker Stands, Height Adjustable Extend 30.0" to 39.1" for Satellite Speakers & Small Bookshelf Speakers up to 11 lbs Per Stand, 1 Pair Floor Stands for Sony Bose Polk JBL Yamaha

If you're needing more sturdy stands for the Samsung SWA-9200S, I recommend these. The top mounting plate is 3.75" square, so it's nicely disguised underneath the 9200's. They would also work well with the SWA-9500S, although a bit of the top plate would show as these speakers are tad thinner. The inner diameter of the tubing is large enough to easily fit the right-angle tip power cable for these also. Note that the back brace is quite tall on these, so it would show at the top of shorter satellites. This could be trimmed down with a good bi-metal hacksaw blade and some muscle. Overall, a really solid set of stands at a great price.

Easy to put together and about as unobtrusive as you can get. I liked the first pair so much, I ordered another. Price seems a bit high for what they are, but still less expensive that most of the others

Overall I like these stands and they will serve there purpose. The price was very affordable and iIeven got them on an Amazon sale. Once thing I wanted was stands that would be low enough for me to keep the speakers hidden behind my couch and these work great. I used them to attach two rear wireless speakers from a Samsung HW-Q990d Soundbar set up. They are sturdy enough for these speakers i see no concerns with them tipping over. My only complaint was that the bolts they provided were way too long for my speakers and even with the spacer provided i needed to add a couple washers. This attachment caused the speakers to sag slightly. Not a big deal, but I will find shorter length bolts to keep the speaker tight against the bracket.

The media could not be loaded. I have axiom audio QS4 surround speakers which weigh 9.4lb and was about to buy the official stand costing 1k shipped.I was browsing on Amazon and came across this as a bargain price of 40$ and purchased it.A lot of the reviews mention this is only meant for tiny speakers under 5 lb and it’s kind of true but, all you need to do is a teeny tiny tweak.The base is about 6 inches square and not too heavy. Straight out of the box, this will NOT support more than 5 lb speakers.I simply slotted an exercise weight plate of 10lb on the base. Standard plates with 1.5” hole will fit very well over the rod and sit on the base. You do need to wriggle it in if you use the screw at the base which holds the stand to the base and want the weight plate to stick to the stand bottom. (Please see pics).Read this carefully:1- I have dropped the stand to its lowest height and the speakers reach just the top of the sofa (see the pics).2- I have tried to push the stand and one has to INTENTIONALLY want to make it fall or it’s going to pop back up (watch video).3- I have slanted the stand up to 15 degrees and it pops back up.4- if you have small children, keeping speakers at this height can cause problems.The rods are thick enough to not bend with 9.4 lb weight and I think they are strong enough for even 20 lb but, you will need to add more weight plates to the base to adjust as per your speakers weight.ConsAs others have pointed out, unless you have super thin speaker cables, you must coil the cables around the stand and cannot route it through the hollow stand.

I had an issue with the bolts for my speakers contacted the customer service and they got me the right bolts in few days and resolved my issueExcellent product and service

Sturdy and nice looking. My speakers look great on them.

Just as advertised. But they should include the M5 mounting bolt along with the M4 & M6 just in case. Like my Poseidon D70.

Am thankful for the reviews here on Amazon hence sharing this hoping it will help someone.Bought this stand for my Samsung HW-Q990D.[Pros]- Price is among the cheapest compared to similar stands on Amazon- Item is sturdy and well made (with minor caveat - see cons below).- Easy to ‘fish’ power cable through the opening- Manual provided, parts labeled- Assembling stand is relatively straightforward (took me 10-15 min)[Cons]- Part securing the speaker is slightly bent (see picture). Applies to both parts that came in the box- Has to slightly change how the bolt is securing the speakerOverall, this stand arguably works for this model. You get what you pay for I guess.